Private & estate driveways

Driveway speed bumps

For a private driveway, a 3-inch modular rubber speed bump cut to the exact driveway width is the standard solution: bolt-down into concrete, asphalt or pavers, ≤ 10 mph target speed, and low enough that a low-clearance car crosses it without scraping. A typical 12–16 ft residential driveway needs one kit and installs in under 30 minutes with a hammer drill.

Get a quote in 24h WhatsApp us

Yellow and black rubber speed bump bolted across a paver residential driveway with a BMW X6 crossing it

Key specs at a glance

Recommended	3" modular rubber
Typical driveway	12–16 ft wide
Target speed	≤ 10 mph
Surfaces	Concrete, asphalt, pavers
Clearance	Sports-car friendly ramp
Install	Under 30 minutes

2.4-inch heavy-duty rubber speed bump with black and yellow segments, white directional arrows and bolt holes

Recommended model

3-Inch Modular Rubber Speed Bump

The 3 in modular profile is quiet at walking speed, sized to any driveway width and finished cleanly with 10 in end caps so nothing sticks out past the pavers.

Height: 3 in
Center module: 39 in and 20 in
End caps: 10 in each
Width (travel length): 15 in
Target speed: ≤ 10 mph
Material: Recycled rubber, UV stable

Finished, not improvised

Molded end caps and flush-torqued anchors give a clean edge on a paver or stamped-concrete driveway — no plywood ramps, no exposed hardware.

Low-clearance friendly

A 15 in ramp over a 3 in rise means performance and luxury vehicles cross without scraping at a walking pace.

Works on pavers

Anchors set into the paver bed; if you ever re-lay the driveway the kit unbolts and goes back down.

Frequently asked

Can I put a speed bump on my own driveway?

Yes. A private driveway is private property, so no permit is needed. Bolt a 3 in modular rubber kit cut to your driveway width into the concrete, asphalt or paver bed — the whole job is under 30 minutes.

Will a speed bump scrape a low car?

Not at driveway speeds. The 3 in profile has 15 in of ramp travel, so crossing at 5–10 mph clears typical sports-car ride height.

What width kit do I need for my driveway?

Measure edge to edge in inches, subtract 20 in for the two end caps, and divide the rest by the module length. Our kit builder does the math and attaches it to your quote.

Do you ship nationwide?

Yes. Every kit is in stock in the USA and ships by LTL freight to all 48 contiguous states. Pallet and container pricing is available for volume orders, and freight is quoted to your ZIP code.

Request pricing

Price your driveway speed bumps

Send lane width and lane count — we reply with a landed price including freight within 24 business hours.