Vanguard Industrial Protection shieldSpeed Bumps For Sale
Get a quote

parking lot speed bumps, commercial speed bumps for parking lot, speed bumps for parking lots, parking lot traffic calming, rubber speed bumps parking lot

Property & facility managers

Parking lot speed bumps

For a commercial parking lot, the right device is a bolt-down rubber speed bump 2–3 in tall with 12–15 in of travel, targeting 5–10 mph. Our 3-inch modular kit covers any lane width using 39 in and 20 in modules plus two 10 in end caps, and a standard 12 ft lane runs about $260–$520 in materials plus freight. Install is a 30-minute, two-person job with a hammer drill — no asphalt work, no lot closure.

Get a quote in 24hWhatsApp us
Rubber speed bumps bolted across a commercial parking lot lane beside access gates

Key specs at a glance

Recommended height3 in
Target speed≤ 10 mph
Typical lane12 ft (144 in)
Material cost per lane$260–$520 + freight
Install time~30 min, 2 people
Spacing150–250 ft apart
2.4-inch heavy-duty rubber speed bump with black and yellow segments, white directional arrows and bolt holes

Recommended model

3-Inch Modular Rubber Speed Bump

Cars and light trucks only, so the 3 in modular profile gives the strongest speed reduction per dollar — and when a section wears or gets clipped by a plow you replace that module, not the whole run.

Height
3 in
Center module
39 in and 20 in
End caps
10 in each
Width (travel length)
15 in
Target speed
≤ 10 mph
Material
Recycled rubber, UV stable

Sized to your lane, not to a box

Center modules = (lane width in inches − 20 in) ÷ module length. Two 10 in end caps close each side so nothing catches a sweeper or a plow blade.

Liability and insurance

Reflective yellow bands plus MUTCD W17-1 signage document a good-faith traffic-calming effort — what carriers look for after a lot incident.

Keep ADA routes clear

Never place a bump across a marked accessible route or crossing, and keep fire-lane clear width intact.

Frequently asked

How much do parking lot speed bumps cost?

Most commercial parking-lot projects land at $260–$520 in materials per 12 ft lane, plus LTL freight to your ZIP. Price moves with profile, lane width, quantity and dock access; pallet pricing drops the unit cost past about 10 lanes.

How many speed bumps does a parking lot need?

Space bumps 150–250 ft apart along drive aisles so drivers cannot accelerate between them, and keep them at least 25 ft away from stop bars, turns and crosswalks.

Rubber or asphalt for a parking lot?

Rubber. A bolt-down rubber bump installs in 30 minutes, can be relocated or removed, and costs a fraction of poured asphalt — which needs a contractor, cure time and lot closure.

How long does installation take?

Bolt-down install takes two people about 30 minutes per 12 ft lane: position the modules, mark the bolt holes, hammer-drill the asphalt or concrete, and torque the anchors flush. No paving contractor and no cure time.

Do you ship nationwide?

Yes. Every kit is in stock in the USA and ships by LTL freight to all 48 contiguous states. Pallet and container pricing is available for volume orders, and freight is quoted to your ZIP code.

Request pricing

Price your parking lot speed bumps

Send lane width and lane count — we reply with a landed price including freight within 24 business hours.

No spam. Pricing, freight and lead time only.

Get a quote in 24h
WhatsApp us